SLATE VRS ML1 / ML2 DRUM SAMPLE LIBRARY

Steven Slate Virtual Microphone modelling drum sample pack for Slate Trigger

This is a product we decided to make because we felt that when were mixing ourselves, were always searching for what were after with samples and can never quite find the right sound, and we decided that it would be incredible to have not only raw samples, but raw samples you can even change your microphones to your own personal choice, thanks to slates microphone modelling system.

This drum sample library was recorded at Roc2 studios in Borras, Wrexham UK, using exclusively the Slate ML1 and ML2 microphones, and Slate VRS8 interfaces. We chose to record with these to give you unlimited possibilities with slate’s microphone modelling to shape your mixes down to the microphone choice and blend of your drums.

Each microphone signal is dry as It was recorded. We have not manipulated these post in any way. We took this decision to give you the full flexibility of the products so you can do whatever you like with them from scratch.

The drum kit that we recorded consists of:

Tama starclassic bubinga 20”x 22” kick drum
Tama starclassic bubinga 10” x 7” tom
Tama starclassic bubinga 12 x 8” tom
Tama starclassic bubinga 14” x 14” tom
Pearl sensitive 13”x 5.5” brass snare drum


————————————————————

The drums were recorded with the following setups:

Kick drum

Kick in- slate ML2 microphone
Kick out 1- slate ML2 microphone
Kick out 2- slate ML1 microphone
Kick sub- recorded with Yamaha subkick
Overheads- stereo slate ML2 microphones in wide formation
Room stereo- slate ML1 microphones
Room Mono- slate ML2 microphone
Chamber Mono- slate ML2 microphone

Snare drum

Snare top- slate ML2 microphone
Snare bottom- slate ML2 microphone
Snare side- (pointed at shell of snare to sit between the top and bottom mics)- slate ML1 microphone
Overheads- stereo slate ML2 microphones in wide formation
Room stereo- slate ML1 microphones
Room Mono- slate ML2 microphone
Chamber Mono- slate ML2 microphone

Toms

Tom top- slate ML2 microphone
Tom bottom- slate ML2 microphone
Tom side- (pointed at shell of tom to sit between the top and bottom mics)- slate ML1 microphone
Overheads- stereo slate ML2 microphones in wide formation
Room stereo- slate ML1 microphones
Room Mono- slate ML2 microphone
Chamber Mono- slate ML2 microphone

All samples are recorded at 48Khz sample rate, 24 bit.

Disclaimer: Please note that this for use along with slate trigger 2 and the slate ML1 and Ml2 microphones and their software. No software is included in this sale, only the trigger library. You can either use these alongside your personally owned Ml1 and Ml2 software or use it as it as flat response with slate trigger.